{ "schema_version": "1.0", "catalog_id": "ra-universal-pct", "release_id": "2026-10-01.1", "reviewed_on": "2026-10-01", "title": "Universal Part-Code Reference", "scope": "Repair-planning operation identities and review prompts only.", "usage": { "purpose": "Use an operation code to identify a possible repair-planning item. Verify its applicability before including it in an estimate.", "limits": "This reference does not establish repair procedures, prices, labor allowances, payment entitlement or approval. It is not an estimating-system import file.", "verification_definitions": { "repair_scope": "Confirm that the operation applies to this repair.", "estimating_inclusions": "Check the current estimating-system inclusions and overlapping work.", "work_documentation": "Document the need, location and work performed.", "vehicle_procedure": "Verify current vehicle-specific manufacturer procedures and requirements.", "product_instructions": "Verify the applicable material or equipment instructions.", "service_record": "Retain the relevant service record or supplier documentation." } }, "categories": [ { "code": "ACC", "label": "Accessories and trim" }, { "code": "BDY", "label": "Body and vehicle protection" }, { "code": "DIA", "label": "Diagnostics and calibration" }, { "code": "ELE", "label": "Electrical and battery" }, { "code": "FLD", "label": "Fluids and refrigerants" }, { "code": "FRM", "label": "Structural work and equipment" }, { "code": "GLS", "label": "Glass and sealing" }, { "code": "MAT", "label": "Repair materials" }, { "code": "RFN", "label": "Refinish preparation and finishing" }, { "code": "STR", "label": "Stripes, tape and adhesive" }, { "code": "SVC", "label": "Vehicle handling" }, { "code": "WHL", "label": "Wheels and alignment" } ], "operations": [ { "code": "ACC01", "category": "ACC", "description": "Spray-applied pickup bed liner", "operation_kind": "external_service", "guidance": "Identify the repair area and document why the existing bed coating requires restoration. Check the estimate for overlapping work.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions", "service_record" ] }, { "code": "ACC02", "category": "ACC", "description": "Pickup cap removal and installation", "operation_kind": "remove_install", "guidance": "Record the access need and the cap attachment points affected by the repair. Check whether another operation already includes this work.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure" ] }, { "code": "ACC03", "category": "ACC", "description": "Front license plate removal and installation", "operation_kind": "remove_install", "guidance": "Identify the front plate and its attachment. Include this as a separate consideration only when the repair scope and estimating inclusions support it.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation" ] }, { "code": "ACC04", "category": "ACC", "description": "Tailgate license plate removal and installation", "operation_kind": "remove_install", "guidance": "Record the need to remove the plate from the tailgate and check whether the tailgate operation already covers it.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation" ] }, { "code": "ACC05", "category": "ACC", "description": "Trunk-lid license plate removal and installation", "operation_kind": "remove_install", "guidance": "Identify the plate mounted on the trunk lid and check the related panel operation before treating removal as additional work.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation" ] }, { "code": "ACC06", "category": "ACC", "description": "Rear-bumper license plate removal and installation", "operation_kind": "remove_install", "guidance": "Identify the plate mounted on the rear bumper. Check the bumper operation for included removal and installation.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation" ] }, { "code": "ACC07", "category": "ACC", "description": "Left running board removal and installation", "operation_kind": "remove_install", "guidance": "Document the access or repair need on the left side. Check the attachment requirements and any overlap with the panel operation.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure" ] }, { "code": "ACC08", "category": "ACC", "description": "Right running board removal and installation", "operation_kind": "remove_install", "guidance": "Document the access or repair need on the right side. Check the attachment requirements and any overlap with the panel operation.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure" ] }, { "code": "ACC09", "category": "ACC", "description": "Rigid pickup-bed cover removal and installation", "operation_kind": "remove_install", "guidance": "Identify the rigid cover and explain why it must be removed for the repair. Review its mounting instructions.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "ACC10", "category": "ACC", "description": "Flexible pickup-bed cover removal and installation", "operation_kind": "remove_install", "guidance": "Identify the flexible cover and its mounting system. Document why removal is needed and check for included access work.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "ACC11", "category": "ACC", "description": "Door-edge protective trim replacement", "operation_kind": "replacement", "guidance": "Record the affected door-edge trim and why it cannot be reused. Check whether it is supplied with another replacement part.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "BDY01", "category": "BDY", "description": "Access work for collision repairs", "operation_kind": "repair", "guidance": "Identify the specific obstruction and the access work required. Avoid an unspecified allowance or duplication of another removal operation.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure" ] }, { "code": "BDY02", "category": "BDY", "description": "Cleanup after restraint deployment", "operation_kind": "repair", "guidance": "Document the affected area and residue. Determine the appropriate handling and cleaning requirements before planning the work.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "BDY03", "category": "BDY", "description": "Interior spill cleanup related to the repair", "operation_kind": "repair", "guidance": "Record the spill location, material and relationship to the repair. Distinguish required cleanup from unrelated interior detailing.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "BDY04", "category": "BDY", "description": "Exterior vehicle covering", "operation_kind": "protection", "guidance": "Identify the surfaces requiring protection and the repair activity that makes covering necessary. Check for masking already included elsewhere.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "BDY05", "category": "BDY", "description": "Temporary covering of a damaged opening", "operation_kind": "protection", "guidance": "Document the exposed opening and the need for temporary weather protection. Describe the material without specifying a brand.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "BDY06", "category": "BDY", "description": "Exterior protection during welding", "operation_kind": "protection", "guidance": "Identify exposed exterior surfaces and document the protection required for the planned welding work. Confirm applicable vehicle and equipment instructions.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "BDY07", "category": "BDY", "description": "Interior protection during welding", "operation_kind": "protection", "guidance": "Identify interior components that need protection for the planned work. Confirm the protection requirements before repairs begin.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "BDY08", "category": "BDY", "description": "Broken-glass cleanup", "operation_kind": "repair", "guidance": "Record where glass fragments are present and the cleanup scope. Distinguish this work from glass removal and general detailing.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure" ] }, { "code": "BDY09", "category": "BDY", "description": "Vehicle cleaning before repair", "operation_kind": "repair", "guidance": "Document the condition that prevents inspection or repair and the cleaning needed to address it. Check for cleaning included in preparation operations.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "BDY10", "category": "BDY", "description": "Interior and component protection during repair", "operation_kind": "protection", "guidance": "Identify the components at risk from the specific repair process. Describe the protection needed and check for overlap with other covering or masking.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation" ] }, { "code": "BDY11", "category": "BDY", "description": "Seat-belt system inspection", "operation_kind": "inspection", "guidance": "Confirm the vehicle-specific inspection requirements that apply after this event. Record the findings and distinguish inspection from any required replacement.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure" ] }, { "code": "BDY12", "category": "BDY", "description": "Supplemental restraint system inspection", "operation_kind": "inspection", "guidance": "Determine the applicable manufacturer inspection requirements. Document the affected components and findings without treating a visual check as proof of system readiness.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure" ] }, { "code": "DIA01", "category": "DIA", "description": "Driver-assistance system calibration", "operation_kind": "diagnostic", "guidance": "Identify the system and the repair event that may trigger calibration. Verify the exact requirement and retain the calibration result.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "DIA02", "category": "DIA", "description": "Road procedure for driver-assistance calibration", "operation_kind": "diagnostic", "guidance": "Confirm whether the particular system requires a road-based calibration procedure. Identify its scope and distinguish it from a general road test.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "DIA03", "category": "DIA", "description": "Low-voltage battery support during diagnostics", "operation_kind": "diagnostic", "guidance": "Confirm whether the planned diagnostic or programming work requires battery support. Document its use and check whether the service already includes it.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "DIA04", "category": "DIA", "description": "Coordination of pre-repair and post-repair scans", "operation_kind": "diagnostic", "guidance": "Identify any actual coordination work and distinguish it from the scan service itself. Check for duplication in the selected scan operation or supplier charge.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "service_record" ] }, { "code": "DIA05", "category": "DIA", "description": "Steering-angle sensor initialization", "operation_kind": "diagnostic", "guidance": "Verify whether the repair requires steering-angle initialization and whether an alignment or calibration service already includes it. Retain the service result.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "DIA06", "category": "DIA", "description": "Post-repair road verification", "operation_kind": "inspection", "guidance": "Document the specific post-repair concern or requirement being checked. Confirm the vehicle is ready for the procedure and retain the result.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "DIA07", "category": "DIA", "description": "Diagnostic road evaluation", "operation_kind": "diagnostic", "guidance": "Identify the reported condition and the reason for a road evaluation. Distinguish diagnostic evaluation from a separate post-repair verification.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "DIA08", "category": "DIA", "description": "Post-repair diagnostic scan", "operation_kind": "diagnostic", "guidance": "Verify the post-repair scanning requirements for the vehicle and repair. Retain the scan results and distinguish scanning from further diagnosis or calibration.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "DIA09", "category": "DIA", "description": "Pre-repair diagnostic scan", "operation_kind": "diagnostic", "guidance": "Verify the pre-repair scanning requirements and retain the results used to plan the repair. Distinguish the scan from subsequent diagnosis of a reported fault.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "DIA13", "category": "DIA", "description": "Occupant-detection system initialization", "operation_kind": "diagnostic", "guidance": "Identify the affected occupant-detection system and verify any inspection, initialization or calibration requirement for the repair. Retain the applicable results.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "ELE01", "category": "ELE", "description": "Battery electrolyte cleanup", "operation_kind": "repair", "guidance": "Identify the affected area and verify the handling requirements for the battery chemistry involved. Document the cleanup scope without assuming a universal procedure.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "ELE02", "category": "ELE", "description": "High-voltage battery charging or charge maintenance", "operation_kind": "electrical", "guidance": "Confirm the vehicle-specific need and authorized method for charge maintenance during the repair. Keep the charging record distinct from other battery operations.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "ELE03", "category": "ELE", "description": "Low-voltage battery disconnection and reconnection", "operation_kind": "electrical", "guidance": "Verify the vehicle requirements and any related initialization work. Check whether the main repair operation already includes disconnection and reconnection.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure" ] }, { "code": "ELE04", "category": "ELE", "description": "High-voltage system isolation and restoration", "operation_kind": "electrical", "guidance": "Verify the manufacturer procedure, required qualifications and documentation for the specific vehicle. The reference entry does not provide an isolation procedure.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "ELE05", "category": "ELE", "description": "Wiring moved temporarily for repair access", "operation_kind": "electrical", "guidance": "Identify the harness or wiring affected, the access need and the required protection. Check whether another removal operation includes this access.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure" ] }, { "code": "ELE06", "category": "ELE", "description": "Wiring repair", "operation_kind": "electrical", "guidance": "Identify the damaged circuit and verify whether the manufacturer permits the proposed repair. Document the repair method by reference to the applicable procedure.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "FLD01", "category": "FLD", "description": "Engine coolant", "operation_kind": "material", "guidance": "Identify coolant lost or required because of the repair. Verify the specified fluid and determine the actual quantity from the work performed.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "FLD02", "category": "FLD", "description": "Brake fluid", "operation_kind": "material", "guidance": "Document why the repair requires brake fluid and confirm the vehicle specification. Check the related service for included material.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "FLD03", "category": "FLD", "description": "Engine oil", "operation_kind": "material", "guidance": "Identify the repair-related need and specified oil. Use the actual service documentation rather than a preset material allowance.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "FLD07", "category": "FLD", "description": "Transmission fluid", "operation_kind": "material", "guidance": "Confirm the transmission and required fluid specification. Document the repair-related use and check for material already included in the service.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "FLD08", "category": "FLD", "description": "Power-steering fluid", "operation_kind": "material", "guidance": "Verify that the vehicle uses a fluid-based steering system and identify the specified fluid. Document the actual repair-related requirement.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "FLD09", "category": "FLD", "description": "R-1234yf refrigerant", "operation_kind": "material", "guidance": "Verify the refrigerant specified for the vehicle and retain the service record. Base any quantity on documented service use.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "FLD10", "category": "FLD", "description": "Air-conditioning leak check", "operation_kind": "diagnostic", "guidance": "Document the reason for leak testing and the applicable method. Check whether the related air-conditioning service includes this test.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "FLD11", "category": "FLD", "description": "R-134a refrigerant", "operation_kind": "material", "guidance": "Verify the refrigerant specified for the vehicle and retain the service record. Check for refrigerant already included in the related service.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "FLD12", "category": "FLD", "description": "Washer fluid", "operation_kind": "material", "guidance": "Identify the repair-related fluid loss or replacement need. Document the material used and avoid adding routine replenishment without a repair basis.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation" ] }, { "code": "FRM01", "category": "FRM", "description": "Preliminary structural pull", "operation_kind": "structural", "guidance": "Identify the damage and purpose of the preliminary pull. Verify repairability and the applicable structural repair plan before selecting the operation.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "FRM02", "category": "FRM", "description": "Structural equipment setup and measurement", "operation_kind": "structural", "guidance": "Identify the measurement or anchoring setup required by the repair plan. Distinguish setup, measurement and corrective work in the documentation.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "FRM03", "category": "FRM", "description": "Equipment setup for a body pull", "operation_kind": "structural", "guidance": "Document the body-pull setup and why it differs from any structural setup already listed. Check the equipment and vehicle requirements.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "FRM04", "category": "FRM", "description": "Unibody dimensional correction", "operation_kind": "structural", "guidance": "Confirm that the planned correction is permitted and supported by measured damage. Retain the relevant dimensional records.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "FRM05", "category": "FRM", "description": "Frame dimensional correction", "operation_kind": "structural", "guidance": "Confirm the frame construction, repairability and measured damage. Document the permitted corrective work and its verification.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "FRM06", "category": "FRM", "description": "Riveting equipment setup and verification", "operation_kind": "structural", "guidance": "Identify the joining process and its equipment setup or verification requirements. Keep the verification record relevant to the actual repair materials.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "FRM07", "category": "FRM", "description": "Restoration of anchoring contact areas", "operation_kind": "structural", "guidance": "Identify any areas affected by approved anchoring and the required restoration. Verify the permitted attachment method and restoration requirements.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "FRM08", "category": "FRM", "description": "Welding equipment setup and verification", "operation_kind": "structural", "guidance": "Identify the approved joining process and its setup or verification requirements. Retain the relevant verification documentation.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "GLS01", "category": "GLS", "description": "Back-glass bonding materials", "operation_kind": "material", "guidance": "Identify the glass application and specified bonding system. Check for materials supplied with the glass or included in an outside service.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "GLS02", "category": "GLS", "description": "Existing glass adhesive removal", "operation_kind": "repair", "guidance": "Identify the location and adhesive-removal scope. Follow the applicable glass and bonding-system requirements and check for included preparation.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "GLS05", "category": "GLS", "description": "Side-glass bonding materials", "operation_kind": "material", "guidance": "Identify the bonded side-glass application and required materials. Check the replacement part and service documentation for included supplies.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "GLS06", "category": "GLS", "description": "Windshield bonding materials", "operation_kind": "material", "guidance": "Verify the required bonding system for the windshield application. Check for materials already included in a glass service or supplied kit.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "GLS07", "category": "GLS", "description": "Glass-edge masking for refinishing", "operation_kind": "protection", "guidance": "Identify the glass edge requiring protection and the specific refinish scope. Confirm that masking is appropriate and not already included.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "GLS08", "category": "GLS", "description": "Post-repair water-leak check", "operation_kind": "inspection", "guidance": "Identify the repaired opening or sealing area and the reason for a water-leak check. Document the test scope and findings.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "MAT01", "category": "MAT", "description": "Adhesion-promoting treatment", "operation_kind": "material", "guidance": "Identify the substrate and coating system that require an adhesion-promoting product. Check for material or application already included in another operation.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "MAT02", "category": "MAT", "description": "Plastic repair material", "operation_kind": "material", "guidance": "Identify the plastic component, approved repair approach and materials used. Verify compatibility with the substrate and finishing system.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "MAT03", "category": "MAT", "description": "Cavity corrosion-protection material", "operation_kind": "material", "guidance": "Identify the repair areas requiring cavity protection and the specified material. Document access and application without assuming every repair requires it.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "MAT04", "category": "MAT", "description": "Cutting discs used in the repair", "operation_kind": "material", "guidance": "Document repair-related cutting-disc use and check the estimating or service basis for separately itemized consumables.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "MAT05", "category": "MAT", "description": "Epoxy primer material", "operation_kind": "material", "guidance": "Identify the substrate and repair stage requiring epoxy primer. Check the coating-system instructions and avoid duplicating other primer entries.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "MAT06", "category": "MAT", "description": "Flexible-coating additive", "operation_kind": "material", "guidance": "Verify whether the actual coating system and component require an additive. Do not assume all flexible components use the same product system.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "MAT07", "category": "MAT", "description": "Acoustic foam installation", "operation_kind": "material", "guidance": "Identify the location, foam function and specified replacement material. Distinguish acoustic foam from structural products.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "MAT08", "category": "MAT", "description": "Existing acoustic foam removal", "operation_kind": "repair", "guidance": "Identify the acoustic foam that must be removed for the repair and its removal scope. Check for access work already included elsewhere.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "MAT09", "category": "MAT", "description": "Existing sound-damping pad removal", "operation_kind": "repair", "guidance": "Identify the affected pad and reason for removal. Review related panel preparation for included removal work.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "MAT10", "category": "MAT", "description": "Sound-damping pad replacement", "operation_kind": "material", "guidance": "Identify the replacement pad location and required function. Check whether the pad is supplied with a replacement panel.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "MAT11", "category": "MAT", "description": "Panel-bonding adhesive", "operation_kind": "material", "guidance": "Identify the approved panel-bonding application and adhesive specification. Document the material used without treating the entry as permission to substitute joining methods.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "MAT12", "category": "MAT", "description": "Repair-area corrosion protection", "operation_kind": "material", "guidance": "Identify the protection disturbed by the repair and the required restoration. Check for overlap with primers, cavity materials and seam sealing.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "MAT13", "category": "MAT", "description": "Abrasive belts used in the repair", "operation_kind": "material", "guidance": "Document repair-related abrasive-belt use and check the basis for separately itemized consumables.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "MAT14", "category": "MAT", "description": "High-build seam-sealing material", "operation_kind": "material", "guidance": "Identify the seam, required profile and approved material. Check for overlap with other seam-sealer entries.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "MAT15", "category": "MAT", "description": "Seam-sealing material", "operation_kind": "material", "guidance": "Identify the seam and applicable sealing requirements. Specify the material actually needed rather than a general allowance.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "MAT16", "category": "MAT", "description": "Flowable seam-sealing material", "operation_kind": "material", "guidance": "Identify the seam and confirm that a flowable product is appropriate for its application. Document the required material and avoid duplicate sealing entries.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "MAT17", "category": "MAT", "description": "Urethane seam-sealing material", "operation_kind": "material", "guidance": "Identify the required application and confirm product compatibility. Check the repair plan for another entry covering the same sealing work.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "MAT18", "category": "MAT", "description": "Applied sound-damping treatment", "operation_kind": "material", "guidance": "Identify the affected sound-damping treatment and its restoration scope. Distinguish an applied coating from replacement pads or foam.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "MAT19", "category": "MAT", "description": "Structural foam installation", "operation_kind": "material", "guidance": "Verify the specified structural product, location and repair requirements. Do not substitute acoustic foam or infer a procedure from this reference.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "MAT20", "category": "MAT", "description": "Weld-through corrosion-protection primer", "operation_kind": "material", "guidance": "Verify whether the approved joining process calls for this product at the specific location. Check product compatibility and related preparation inclusions.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "RFN02", "category": "RFN", "description": "Refinish color adjustment", "operation_kind": "refinish", "guidance": "Document the color-match issue and the adjustment work performed. Check whether a more specific color-verification entry covers the same work.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN03", "category": "RFN", "description": "Paint-finish defect correction", "operation_kind": "refinish", "guidance": "Identify the finish defect, affected area and correction scope. Check the coating-system guidance and any included finish work.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN04", "category": "RFN", "description": "Repair-edge feathering", "operation_kind": "refinish", "guidance": "Identify the repaired area and feathering scope. Check for overlap with a combined preparation operation.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN05", "category": "RFN", "description": "Repair-area feathering, priming and blocking", "operation_kind": "refinish", "guidance": "Document the combined preparation scope and affected area. Avoid duplicating individual feathering or primer-preparation entries.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN06", "category": "RFN", "description": "Stone-impact protective coating application", "operation_kind": "refinish", "guidance": "Identify the area and texture requiring restoration. Verify the compatible coating system and related refinish scope.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "RFN07", "category": "RFN", "description": "Existing stone-impact protective coating removal", "operation_kind": "repair", "guidance": "Identify the coating and removal needed for the repair. Check whether the panel or coating preparation already includes this work.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN08", "category": "RFN", "description": "Three-stage color verification panel", "operation_kind": "refinish", "guidance": "Confirm the coating system and the need for a color-verification panel. Document the verification work and avoid overlap with general color adjustment.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN09", "category": "RFN", "description": "Four-stage color verification panel", "operation_kind": "refinish", "guidance": "Identify the coating system and the color-verification work required. Record the verification scope separately from duplicated tinting entries.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN10", "category": "RFN", "description": "Door-opening masking", "operation_kind": "protection", "guidance": "Identify the door opening and refinishing activity requiring protection. Check for overlap with general opening or jamb masking.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN11", "category": "RFN", "description": "Engine-compartment masking", "operation_kind": "protection", "guidance": "Identify the compartment surfaces requiring protection for the planned refinishing. Review the related preparation inclusions.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN12", "category": "RFN", "description": "Masking for primer application", "operation_kind": "protection", "guidance": "Identify the primer area and adjacent surfaces requiring protection. Check whether the relevant preparation operation includes this masking.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN13", "category": "RFN", "description": "Jamb and opening masking", "operation_kind": "protection", "guidance": "Identify each opening or jamb requiring protection and the reason. Avoid duplication with a more specific opening-masking entry.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN14", "category": "RFN", "description": "Trunk-opening masking", "operation_kind": "protection", "guidance": "Identify the trunk opening and the planned refinish scope. Check for masking already included in related preparation.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN15", "category": "RFN", "description": "Primer application and blocking", "operation_kind": "refinish", "guidance": "Document the repaired area and primer-preparation scope. Check for duplication with a combined feather, prime and block entry.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN16", "category": "RFN", "description": "Primer color adjustment", "operation_kind": "refinish", "guidance": "Verify the coating-system requirement for primer color and document any adjustment performed. Check the related preparation for included work.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN19", "category": "RFN", "description": "Unprimed flexible-part preparation", "operation_kind": "refinish", "guidance": "Identify the supplied part condition and specified preparation system. Verify the substrate requirements and check for included preparation.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "RFN20", "category": "RFN", "description": "Finish sanding and polishing", "operation_kind": "refinish", "guidance": "Identify the area, finish objective and actual work performed. Distinguish this operation from localized defect correction and included finish work.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN21", "category": "RFN", "description": "Masking for seam-sealer application", "operation_kind": "protection", "guidance": "Identify the seam and adjacent areas requiring protection. Check whether the sealing or preparation operation includes the masking.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "RFN22", "category": "RFN", "description": "Masking for stone-impact coating application", "operation_kind": "protection", "guidance": "Identify the coating boundary and protection needed. Check for overlap with other masking for the same application.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "STR01", "category": "STR", "description": "Blackout film replacement", "operation_kind": "replacement", "guidance": "Identify the affected decorative film and replacement scope. Check whether the replacement part already includes the film.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "STR02", "category": "STR", "description": "Adhesive-tape renewal for a reusable component", "operation_kind": "repair", "guidance": "Identify the reusable component and the tape-renewal requirement. Check the removal operation and part supply for included material or preparation.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "STR03", "category": "STR", "description": "Painted pinstripe restoration", "operation_kind": "external_service", "guidance": "Document the existing stripe and repair-related restoration scope. Retain relevant outside-service documentation when applicable.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions", "service_record" ] }, { "code": "STR04", "category": "STR", "description": "Adhesive pinstripe replacement", "operation_kind": "replacement", "guidance": "Identify the affected stripe and the actual replacement scope. Verify the product and avoid assuming a preset number of pieces per panel.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "STR05", "category": "STR", "description": "Adhesive residue removal", "operation_kind": "repair", "guidance": "Identify the residue and why it must be removed. Check whether the related trim, stripe or film operation includes cleanup.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "STR06", "category": "STR", "description": "Emblem and remaining adhesive removal", "operation_kind": "repair", "guidance": "Identify the affected emblem and adhesive-removal scope. Check whether the replacement or refinishing operation already includes this work.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] }, { "code": "STR07", "category": "STR", "description": "Existing adhesive pinstripe removal", "operation_kind": "repair", "guidance": "Identify the stripe and repair-related removal area. Check for removal already included with replacement or panel preparation.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "product_instructions" ] }, { "code": "SVC04", "category": "SVC", "description": "Movement of a disabled vehicle for repair access", "operation_kind": "vehicle_handling", "guidance": "Document why the vehicle cannot move normally and the movement required for the repair. Distinguish this work from ordinary movement through the facility.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure" ] }, { "code": "SVC06", "category": "SVC", "description": "Vehicle transport for an outside repair service", "operation_kind": "vehicle_handling", "guidance": "Identify the required outside service and transport need. Retain the related record and check for transport included in the service.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "service_record" ] }, { "code": "WHL01", "category": "WHL", "description": "Four-wheel alignment", "operation_kind": "external_service", "guidance": "Verify the repair-related alignment requirement and retain the measurement record. Check the service scope for included sensor initialization or other work.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "WHL02", "category": "WHL", "description": "Wheel and tire balancing", "operation_kind": "repair", "guidance": "Identify the affected wheel and repair-related balancing need. Check whether tire installation or another service already includes balancing.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "WHL03", "category": "WHL", "description": "Tire installation and balancing", "operation_kind": "external_service", "guidance": "Identify the tire, wheel and repair-related service scope. Check for overlap with separately listed balancing or related material.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "service_record" ] }, { "code": "WHL05", "category": "WHL", "description": "Tire valve replacement", "operation_kind": "replacement", "guidance": "Identify the valve type and reason for replacement. Check whether the tire service or pressure-monitoring component includes the required valve.", "verification": [ "repair_scope", "estimating_inclusions", "work_documentation", "vehicle_procedure", "product_instructions" ] } ] }